A list of the contents of this article:
Usage of butter gun
Unscrew the oil gun head so that the oil gun head is separated from the barrel. Lock the locking piece at the end of the barrel and push the handle at the end of the barrel to the end. Dip the beginning of the butter gun into the butter barrel, about 30 mm deep, pull the handle at the end of the barrel, and suck the butter into the bobbin. Re-screw the yellow end of the gun, press the tail of the barrel to lock, and push the driven handle to start exhaust.
Put the butter into the butter container. Put the container into the container of the butter gun. Put the muzzle in the container. Open the butter gun and turn the screw to the desired position. Press the lifting lever of the butter gun with your thumb or little finger and push the butter out of the container. Close the butter gun, release the lifting rod, and complete the butter loading work.
Unscrew the oil gun to separate the oil gun from the barrel. Dip the opening part of the barrel into the barreled butter and hold the barrel tightly with one hand about 30 mm deep and pull the driven handle at the back of the barrel to suck the butter into the barrel. Install the oil gun head and press the locking piece at the end of the barrel and push the follower handle into the barrel.
First pull up the spring pull rod at the tail of the butter gun, rotate the lever handle and fix it; then unscrew the head oil barrel cover and fill it with butter; finally, cover the oil barrel cover and tighten it, release the pull rod, point the oil injection gun nozzle at the butter nozzle, and press the oil injection handle repeatedly.
How to use a butter gun?
Question 3: is the butter gun suitable for all kitchens? Butter guns can be used in a variety of kitchen environments, but you need to ensure sanitary conditions and cleaning measures when using them. Question 4: does the material of the butter gun container affect the use? Butter gun containers are generally made of plastic or stainless steel, and different materials may have different preservation time and fresh-keeping effect on butter or soft food materials.
2. Install the oil gun head and press the locking piece at the end of the barrel and push the follower handle into the barrel. Note that it is easier to leave air in this oil-loading gun so that the butter cannot be shot. At this time, the driven handle at the end of the barrel should be pulled to the end, then press the locking piece at the tail of the barrel with one hand and press the locking piece at the end of the barrel with one hand and push the handle into the barrel at the same time to exhaust the air from the gun.
3. The pneumatic butter gun is relatively easy to use. As long as the air source is connected and the gas source switch is turned on, it can start to work. The operation of the electric butter gun is similar, just turn on the power supply and turn on the switch. The manual butter gun needs to be operated manually, and the user drives the butter gun through the strength of the hand. The pedal butter gun is operated through the pedal, which is suitable for situations that require a long time to apply force.
4. Remove the butter from the refrigerator and make sure it softens to a suitable squeeze state at room temperature. Open the top or sliding cover of the butter gun and put the butter block into the container. Reclose the top lid or sliding cover of the butter gun and make sure they are tightly glued and locked. Pick up the butter gun, point its nozzle at the food or surface where you want to squeeze the butter, and then squeeze the trigger or button of the butter gun with appropriate force.
5. When using the butter gun, we need to pay attention to the control efforts to avoid excessive extrusion of the butter gun, resulting in grease spilling or damage to the butter gun. At the same time, after use, it is necessary to clean the butter gun to avoid grease residue affecting the next use. When cleaning, you can use a soft cloth or paper towel to wipe the outside of the butter gun to remove grease residue. For the interior of the butter gun, a cleaner can be used to clean the butter pipe and the interior of the gun body to ensure that the butter gun is in good working condition.
6. Cleaning and maintenance: after use, clean the butter gun and butter muzzle in time to avoid butter residue and hardening. Check and maintain the butter gun regularly to ensure its normal operation and prolong its service life. Please note that the methods and procedures for using manual butter guns may vary depending on brand and model. Therefore, in the actual operation, it is recommended to refer to the product manual or consult a professional to ensure the correct and safe use of the butter gun.
How to add butter to bearings
First remove the oil seal on both sides of the bearing with butter, then clean the bearing with diesel oil and dry the diesel oil on the bearing, first apply one side of the butter to the oil seal and then smear the oil seal on the other side.
Prepare materials and prepare butter, cleaning cloth, brushes, gloves and ink knives before adding butter. For large machines, it is also necessary to use oiler and other tools. P cleaning bearing seat p cleaning is a necessary step before adding butter. The steps are as follows: P (1) apply the cleaner with a cleaning cloth to wipe the dust and stains on the surface of the bearing housing. P (2) dry the bearing seat with a clean cloth.
Remove both sides of the oil seal, then clean the bearing with diesel oil and dry the diesel oil on the bearing, first apply one side of the butter to the oil seal, and then apply the other side of the butter to the oil seal. Bearing is an important part of contemporary mechanical equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient in the process of its motion, and ensure its rotation accuracy.
When adding butter to the bearing with a butter gun, cover a hose on the oil injection rod and fasten the sleeve buckle firmly to prevent leakage from the sleeve when squeezing lubricating grease, at the same time, install a nozzle sleeve and an internal plug matching the butter nozzle thread at the other end of the hose, extend the inner plug into the butter nozzle at the oil filling position, and then tighten the mouth sleeve. A butter gun is a manual tool for filling mechanical equipment with grease.
Open the bearing cover before you butter it. Many bearings do not have a butter nozzle is no way to directly hit the butter, the need to open the bearing lid, and then add lubricating oil. The purpose of lubricating oil is to make the machine lubricated and reduce wear and tear, mainly hitting butter on the front and rear steel plate pins, transmission shaft cross shafts, suspension bridges, left and right balance shafts, turntables, directional engine expansion forks, and so on.
Here are the steps on how to lubricate the separation bearing: first, open the clutch cover and check the wear of the separation bearing. If the bearing is not damaged and the wear does not exceed the limit, the lubricating oil can be filled next. Remove the clutch pedal and adjust the connecting rod pin so that the separation bearing and its seat return to the last position. Then, use a sharp-nosed butter gun to fill the hole in the bearing housing with butter until oil spills from the bearing.
